BTL MTG
Sign in
// Reference sheet · v1.0

Turn structure and instant windows

Exactly when each player may cast an instant. Every step of the turn is drawn as a priority timeline: two vertical rails (you and your opponent), each node is one moment, and the number in a node is the order in which players get to act.

The one rule you need to know

  1. A step or phase does not end until all players pass priority in succession with an empty stack.
  2. The active player (you, on your turn) receives priority first. If you do nothing, you pass it, and the nonactive player receives it.
  3. So “I’m not doing anything” is not a way to skip your opponent. It is how you hand them the floor.
Priority windowA numbered node. The player may cast instants, activate abilities and cast cards with flash.
Turn-based actionA ▼ square. It doesn’t use the stack and nobody can respond to it.
Closed zoneHatched band across both rails. Nobody receives priority during the whole step.
YOU / OPPLeft rail is the active player (AP), right rail the nonactive player (NAP).

Five phases, twelve steps

1

Beginning phase

YOUOPPSTEP
▼

a. Untap step 502

You untap only your own permanents. Your opponent isn’t involved; they untap on their own turn. Nobody receives priority. It is the only step of the turn where nothing can be done at all. The last window before it was the end step of the previous turn, which in 1v1 is the end of your opponent’s turn. Anything meant for now had to happen there.

No instants
1
2

b. Upkeep step 503

First, triggered abilities like “at the beginning of your upkeep” go on the stack. Then priority: you first, your opponent second.

Instants · both
▼1
2

c. Draw step 504

Draw first, then priority. Nobody can respond to the draw itself; it is a turn-based action. Only then do you receive priority, followed by your opponent.

Draw = forced Instants · after
2

Precombat main phase

YOUOPPSTEP
1
2

Main phase 505

You: anything. One land per turn, creatures, sorceries, artifacts, enchantments, planeswalkers. “Sorcery speed” means exactly this: your main phase, empty stack, and you hold priority.

Sorceries can’t be stacked on top of each other. You can’t cast the second until the first has resolved, and it only resolves once both of you pass. Your opponent therefore gets a window after each one, before it resolves. The same goes for creatures, artifacts and enchantments. That’s why order matters: if you play ramp and then something expensive, your opponent has a window in between.

Opponent: only instants, activated abilities and flash cards, never sorceries or ordinary creatures. But they receive priority every time you pass, even if you cast nothing.

Sorceries · you only Instants · both
3

Combat phase

YOUOPPSTEP
1
2
← key step · see common question

a. Beginning of combat step 507

A step that exists mostly so your opponent gets to act before attackers are declared. You pass, and they may cast an instant: kill your creature, tap it, cast a Fog in advance, anything.

Once you both pass in this step, your opponent’s chance to prevent the attack is over. From here on they can only respond to an attack that has already happened.

Instants · both
▼1
2

b. Declare attackers step 508

You choose attackers and tap them. This doesn’t use the stack and can’t be responded to. It is a turn-based action that happens immediately and all at once. Then “whenever ~ attacks” triggers go on the stack, and only then priority.

An instant cast now kills the creature only after the declaration: the attack happened, triggers fired, and the tap isn’t undone.

Declaration = forced Instants · after
2
▼1

c. Declare blockers step 509

Now your opponent acts: they choose blockers, again as a forced action nobody can respond to. Then “whenever ~ blocks” triggers and priority. The active player still receives it first.

Classic trap: if you kill the blocker now, the attacker remains blocked and deals no damage to the player unless it has trample.

Blocks = forced Instants · after
▼1
▼2

d. Combat damage step 510

The attacker divides its damage among its blockers however it likes. Then all combat damage is dealt simultaneously and as a forced action. Priority comes only afterwards, so it’s too late to save a creature. That had to happen in step c.

First strike / double strike: there are two damage steps. Between them is a full priority window, and that’s where most combat tricks get played.

Damage = forced Instants · after
1
2

e. End of combat step 511

The last moment creatures are still “attacking” and “blocking”. Those designations disappear when the step ends. Rarely used, but it exists.

Instants · both
4

Postcombat main phase

YOUOPPSTEP
1
2

Main phase 505

Same rules as phase 2. If you haven’t played a land yet, you can play it here. In practice, creatures and sorceries are often best cast here. In the first main phase you only give away information and hand your opponent an extra window.

Sorceries · you only Instants · both
5

Ending phase

YOUOPPSTEP
1
2

a. End step 513

“At the beginning of the end step” triggers, then priority. Your opponent’s favourite window. They play flash creatures and card-draw instants here so their mana doesn’t go to waste and the cards are ready for their own turn.

Instants · both
▼

b. Cleanup step 514

Discard down to seven cards, damage wears off creatures, and “until end of turn” effects end. Normally nobody receives priority.

Exception: if something triggers or a state-based action needs to be performed, players do receive priority. Once they pass, another cleanup step follows.

Usually no instants

How a single cast plays out

  1. You cast a spell. It goes on the stack; nothing has happened yet.
  2. You keep priority (retain priority); it isn’t passed automatically. You may add another instant on top, but not a sorcery, because the stack isn’t empty any more.
  3. You pass. Your opponent receives priority and may respond. Their response goes on top of your spell.
  4. When you both pass in succession, only the top object of the stack resolves. Last in, first out.
  5. Priority returns to you and play continues from step 2 until the stack is empty and you both pass.

You keep priority after casting. Passing isn’t automatic: after step 1 you get priority back, so you can stack several instants without your opponent getting a word in between. Their window opens only when you pass.

Not sorceries, though. They require an empty stack, so they can’t be stacked. Between any two of them there is necessarily a full round of passing, and therefore a window for your opponent.

Resolution is atomic. Nobody can step into a resolution in progress. You can only respond between resolutions, and each of those gaps is a full priority window.

Outside the stack: mana abilities and playing a land (a special action). Nobody can respond to them; they happen immediately.

The loop that drives the turn

The stack doesn’t empty all at once. As long as anything is on it, this loop runs:

loop:
  perform state-based actions   (this is where creatures die)
  active player receives priority
  did both pass in succession?
    ├─ no  → whoever didn’t pass added an object on top → back to loop
    └─ yes → is the stack empty?
              ├─ yes → step / phase ends
              └─ no  → resolve ONE top object → back to loop

Resolution happens the moment of the second pass, not when priority comes back to you. Nobody holds priority while something resolves. Afterwards the active player receives it, not whoever passed last.

A response resets the loop. If your opponent casts something instead of passing, it goes on top of everything and resolves first. The pass count starts over.

Example: three instants stacked up

cast A, then B, then C      → stack: [C, B, A]   (C on top)
                             you held priority the whole time

you pass → opponent passes   → only C resolves
priority → you               → stack: [B, A]
you pass → opponent passes   → only B resolves
priority → you               → stack: [A]
you pass → opponent passes   → only A resolves
priority → you               → stack empty
you pass → opponent passes   → step ends

Between each pair of resolutions there is a full window. Your opponent can let C resolve and step in against B. That’s why responses resolve in reverse order (last in, first out).

Same thing in the main phase

When you cast several sorceries or creatures in a row, each one forces its own pass through the whole loop, because the stack must be empty before the next can be cast. It isn’t a new stack; it is still one and the same zone, emptied and refilled.

A phase ends only when both hold: the stack is empty and both players passed in succession. Until both are true, play goes on.

Can my opponent act before I attack?

Yes, even if you cast nothing

That is exactly why the rules have the beginning of combat step (507). Not casting a sorcery doesn’t close their window. Quite the opposite: your pass is what opens it.

There is no way to deny your opponent a response. All you can control is how much information they have when they get it. That’s why creatures and sorceries are best cast in the postcombat main phase.

What your opponent can’t do: respond whenever they like. They can act only while they hold priority. They can’t stop you “in the middle” of declaring attackers, and once they passed in the beginning of combat, tapping your creature no longer prevents the attack.

House-rule tip: agree that every pass is followed by a quick “any response?”, especially at beginning of combat and after blockers. Otherwise you’ll keep rewinding.

Pass = your opponent’s turn to speak

A phase ends only with an empty stack and two passes in a row. Turn-based actions (draw, declarations, damage) don’t use the stack. Card mechanics are on the Keywords page.

Comprehensive Rules 500–514 · priority 117 · stack 405 · rules as of 11/2026